Are you looking for Amk Servo drive repair, AMK servo motor repair ?
Star Automation will meet all of your needs for the repair of your servo Drives and servo motors.
Please refer to the below for a listing of the Amk servo motor and drives we are equipped to service.
* Resolver variant
Force-ventilated design, rated voltage 350 V
Liquid-cooled design, rated voltage 350 V
Special design DS 28
Explanation of characteristic values:
Mo ... Continuous standstill torque
MN ... Continuous torque
PN ... Rated power
IN .... Rated current
nN ... Rated speed
nF ... Limit speed constant rated power
nmax ... Maximum speed
J ... Inertia
We service,repair, replace, built, rebuild, regrind, recondition, refurbish, remanufacture, retrofit and overhaul all Panasonic servos.
We Have Motors For Sale and/or Exchange
To help minimize your down-time we can exchange or replace your damaged motor. Star Automations has an extensive inventory of rebuilt and new servo motors and spindle motors for exchange and/or sale.
Star Automation will meet all of your needs for the repair of your servo Drives and servo motors.
- Balancing
- Magnet Broken
- Broken Shaft
- Circuit Board Repair
- Connector Damage
- Commutator Machining
- Damaged Stator
- Encoder Repair
- Electronics Repair
- Faulty Bearings
- Low Torque Output Repair
- Magnetizing
- New Rotor Installation
- Resolver Rewind
- Rewinding
- Stator Repair
- Rotor Machining
- Retrofiting
- Shaft Machining
- Tacho Repair
- Weak Magnets Repair
- & More
Please refer to the below for a listing of the Amk servo motor and drives we are equipped to service.
Motor type | Flange-square [mm] | MO [Nm] | IO [A] | MN [Nm] | PN [kW] | IN (A) |
nN [U/min] | nmax [1/min] | Mmax [Nm] | Imax[A] | kT [Nm/A] | J [kgcm²) | m [kg] | L [mm] |
DT3-0,5-10-RxO-9000 | 55 | 0,64 | 1,14 | 0,5 | 0,31 | 0,9 | 6000 | 10000 | 1,9 | 4,0 | 0,56 | 0,1 | 0,8* | 114* |
DT3-1-10-RxO-9000 | 1,59 | 3,2 | 0,9 | 0,6 | 2,2 | 6000 | 10000 | 4,5 | 9,6 | 0,5 | 0,3 | 1,9* | 174* | |
DT4-1-10-RxO-6000 |
70 |
1,25 | 1,32 | 1,0 | 0,44 | 1,1 | 4000 | 8000 | 3,9 | 4,0 | 0,95 | 0,36 | 2,3* | 110,5* |
DT4-2-10-RxO-6000 | 2,4 | 2,55 | 1,9 | 0,8 | 2,0 | 4000 | 6000 | 6,4 | 6,3 | 0,94 | 0,68 | 2,7* | 142* | |
DT4-4-10-RxO-6000 | 3,9 | 4,53 | 2,33 | 0,98 | 2,7 | 4000 | 6000 | 14,0 | 16,0 | 0,86 | 1,44 | 3,5* | 205* | |
DT5-3-10-RxO-5000 |
100 |
2,4 | 2,1 | 1,7 | 0,8 | 1,5 | 4500 | 5000 | 10,0 | 10,0 | 1,14 | 1,87 | 4,4* | 157* |
DT5-5-10-RxO-5000 | 4,5 | 4,0 | 3,3 | 1,2 | 2,8 | 3500 | 5000 | 20,0 | 20,0 | 1,13 | 3,05 | 4,9* | 187* | |
DT5-9-10-RxO-4000 | 8,4 | 5,7 | 6,0 | 1,9 | 4,1 | 3000 | 4000 | 41,0 | 33,0 | 1,47 | 5,7 | 7,4* | 247* | |
DT6-13-10-RxO-3500 | 140 | 14,4 | 11,9 | 7,9 | 2,5 | 6,5 | 3000 | 4000 | 47,0 | 46,0 | 1,2 | 11,3 | 12,2* | 285* |
DT6-20-10-RxO-3500 | 25,0 | 19,2 | 11,0 | 3,4 | 8,5 | 3000 | 5000 | 72,0 | 67,0 | 1,3 | 18,7 | 17,0* | 345* | |
DT7-11-20-RxO-3500 |
142 |
10,0 | 6,6 | 6,6 | 1,9 | 4,4 | 2800 | 3500 | 39,0 | 33,0 | 1,51 | 14,9 | 9,3* | 204* |
DT7-17-20-RxO-3500 | 17,0 | 11,3 | 11,0 | 2,8 | 7,2 | 2500 | 3500 | 65,0 | 50,0 | 1,5 | 33,0 | 14,2* | 234* | |
DT7-28-20-RxO-2000 | 28,0 | 10,4 | 19,0 | 3,0 | 7,2 | 1500 | 4000 | 140,0 | 67,0 | 2,68 | 57,0 | 18,9* | 294* | |
DT7-40-20-RxO-2000 | 42,0 | 15,2 | 29,0 | 3,0 | 10,5 | 1000 | 2000 | 210,0 | 100,0 | 2,76 | 85,0 | 25,4* | 354* | |
DT10-54-20-RxO-1500 |
190 |
55,0 | 10,6 | 34,0 | 2,8 | 6,4 | 800 | 2500 | 150,0 | 33,0 | 5,2 | 174,0 | 42,0* | 298* |
DT10-95-20-RxO-700 | 95,0 | 12,8 | 54,0 | 3,4 | 7,3 | 600 | 1000 | 310,0 | 33,0 | 7,4 | 380,0 | 61,0* | 418* |
Liquid-cooled design
Motor type | Flange-square[mm] | MO [Nm] | IO [A] | MN [Nm] | PN [kW] | IN (A) |
nN [U/min] | nmax [1/min] | Mmax [Nm] | Imax[A] | kT [Nm/A] | J [kgcm²) | m [kg] | L [mm] |
DT5-15-10-RxW-6000 | 100 | 15,0 | 16,5 | 8,9 | 4,3 | 8,9 | 4500 | 6000 | 32,0 | 40,0 | 0,91 | 7,4 | 14,0 | 246,5 |
DT5-23-20-RxW-6500 | 23,0 | 25,6 | 13,5 | 7,1 | 15,0 | 5000 | 6000 | 47,0 | 67,0 | 0,9 | 8,3 | 17,0 | 353,5 | |
DT7-55-20-RxW-5200 | 150 | 60,0 | 60,0 | 38,0 | 14,0 | 38,0 | 3500 | 5000 | 110,0 | 132,0 | 1,0 | 57,0 | 21,0 | 288,0 |
DT7-72-20-RxW-5000 | 88,0 | 72,7 | 52,0 | 18,0 | 43,0 | 3000 | 5000 | 160,0 | 200,0 | 1,21 | 85,0 | 25,0 | 348,0 | |
DT10-100-20-RxW-3000 | 200 | 95,0 | 54,0 | 66,0 | 11,0 | 38,0 | 1500 | 3000 | 160,0 | 132,0 | 1,75 | 175,0 | 43,0 | 292,0 |
DT10-145-20-RxW-2000 | 160,0 | 66,7 | 120,0 | 18,0 | 50,0 | 1500 | 2500 | 310,0 | 200,0 | 2,4 | 330,0 | 64,0 | 412,0 | |
DT10-200-20-RxW-2500 | 220,0 | 78,6 | 153,0 | 24,1 | 55,0 | 1500 | 3500 | 430,0 | 200,0 | 2,8 | 480,0 | 83,0 | 532,0 |
Motor type | MO [Nm] | IO [A] | MN [Nm] | PN [kW] | IN (A) |
nN [U/min] | nmax [1/min] | Mmax [Nm] | Imax[A] | kT [Nm/A] | J [kgcm²) |
DTK5-3-10-RxO-6000 | 2,4 | 3,1 | 1,7 | 0,7 | 2,2 | 4000 | 6000 | 9,0 | 16,0 | 0,77 | 1,72 |
DTK7-11-20-RxO-3500 | 10,0 | 6,6 | 6,6 | 1,9 | 4,4 | 2800 | 3500 | 39,0 | 33,0 | 1,5 | 14,9 |
Motor type |
Flange-
square [mm]
|
MO [Nm] |
MN [Nm] | Mmax [Nm] | PN [kW] | IN [A] | nN [1/min] | nmax [1/min] |
kT [Nm/A] |
J [kgcm²] | m [kg] | L [mm] | LBR[mm] |
DS13-85-6-Ex0-2600 | 260 | 83 | 60 | 400 | 12,6 | 26 | 2000 | 5000 | 2,3 | 660 | 75 | 398 | 490 |
DS13-145-6-Ex0-2600 | 260 | 145 | 90 | 660 | 14,2 | 55 | 1500 | 5000 | 1,9 | 1324 | 150 | 578 | 670 |
Force-ventilated design, rated voltage 350 V
Motor type |
Flange-
square
[mm]
|
MO [Nm] | MN [Nm] | Mmax [Nm] | PN [kW] | IN [A] | nN [1/min] | nmax [1/min] |
kT [Nm/A] |
J [kgcm²] | m [kg] | L [mm] | LBR[mm] |
DS13-120-6-ExF-2600 | 260 | 120 | 100 | 400 | 21,1 | 44 | 2000 | 3000 | 2,3 | 660 | 100 | 560 | 650 |
DS13-190-6-ExF-2600 | 260 | 220 | 170 | 650 | 31,5 | 88 | 1800 | 3000 | 1,9 | 1324 | 156 | 740 | 830 |
Liquid-cooled design, rated voltage 350 V
Motor type |
Flange-
square
[mm]
|
MO [Nm] | MN [Nm] | Mmax [Nm] | PN [kW] | IN [A] | nN [1/min] | nmax [1/min] |
kT [Nm/A] |
J [kgcm²] | m [kg] | L [mm] | LBR[mm] |
DS13-170-6-ExW-2600 | 260 | 160 | 150 | 400 | 28,1 | 68 | 2000 | 3000 | 2,3 | 660 | 88 | 400 | 495 |
DS13-250-6-ExW-2600 | 206 | 290 | 260 | 650 | 48 | 138 | 1800 | 3000 | 1,9 | 1324 | 580 | 675 |
Special design DS 28
Motor type | MO [Nm] | MN [Nm] | Mmax [Nm] | PN [kW] | IN [A] | nN [1/min] | nmax [1/min] |
kT [Nm/A] |
J [kgcm²] | m [kg] | L [mm] | LBR[mm] |
DS28-350-40-SB0 | 350 | 255 | 920 | 6,7 | 13,4 | 250 | 1200 | 19 | 14828 | 243 | ....... | 475 |
DS28-650-40-SB0 | 650 | 550 | 1530 | 11,5 | 29 | 200 | 1200 | 19 | 24428 | 370 | ...... | 555 |
Motor type | Mo [Nm] | MN [Nm] | PN [kW] | IN[A] | nN [1/min] | nF[1/min] | nmax [1/min] | J [kgcm²] |
DH10-40-4-IxF-1500 | 50 | 40 | 6,3 | 15 | 1500 | 4500 | 5500 | 180 |
DH10-55-4-IxF-1500 | 60 | 53 | 10 | 22,5 | 1800 | 3600 | 5500 | 220 |
DH13-60-4-IxF-1500 | 68 | 60 | 9,5 | 23 | 1500 | 3000 | 5000 | 460 |
DH13-100-4-IxF-1500 | 110 | 95 | 15 | 34 | 1500 | 3000 | 5000 | 800 |
DH13-120-4-IxF-1500 | 124 | 110 | 17,5 | 39 | 1500 | 3000 | 5000 | 950 |
DH13-150-4-IxF-1800 | 175 | 150 | 28 | 63 | 1800 | 3200 | 5000 | 1200 |
DH16-180-4-IxF-1500 | 207 | 180 | 28 | 55 | 1500 | 3000 | 4500 | 1600 |
DH16-240-4-IxF-1500 | 265 | 230 | 36 | 73 | 1500 | 3000 | 4500 | 2100 |
Explanation of characteristic values:
Mo ... Continuous standstill torque
MN ... Continuous torque
PN ... Rated power
IN .... Rated current
nN ... Rated speed
nF ... Limit speed constant rated power
nmax ... Maximum speed
J ... Inertia
We service,repair, replace, built, rebuild, regrind, recondition, refurbish, remanufacture, retrofit and overhaul all Panasonic servos.
ac servo motor exchange
We Have Motors For Sale and/or Exchange
To help minimize your down-time we can exchange or replace your damaged motor. Star Automations has an extensive inventory of rebuilt and new servo motors and spindle motors for exchange and/or sale.
For any other related information feel free to contact us.
No comments:
Post a Comment