PG Speed Controller Cards ,PG-A2,PG-B2,PG-D2,PG-X2,DeviceNet,Pulse Generator,

PG Speed Controller Cards

PG-A2

(Code No. 73600-A012X)

Pulse generator on motor performs speed feedback to correct speed fluctuations caused by slipping (for V/f control with PG).

· Complementary, PG-compatible open collector output

· Phase A pulse (single pulse) inputs

· PG frequency range:

Approx. 32,767 Hz max.

· Pulse monitor output:

+12 V, 20 mA

· Power supply output for PG:

+12 V, Max. current: 200 mA

PG-B2

(Code No. 73600-A013X)

Used for flux vector control. The PG mounted on the motor performs speed feedback to correct speed fluctuations due to slipping. (This card also performs V/f control with a Pulse Generator (PG).)

· Complementary, PG-compatible output

· Phase A and B pulse inputs (exclusively for complementary inputs)

· PG frequency range:

Approx. 32,767 Hz max.

· Pulse monitor output:

Open collector, +24 V,
Max. current: 30 mA

· Power supply output for PG:

+12 V, Max. current: 200 mA

PG-D2

(Code No. 73600-A014X)

Used for V/f control with PG. The PG mounted on the motor performs speed feedback to correct speed fluctuations due to slipping.

· PG-compatible RS-422 output

· Phase A pulse (differential pulse) input

· PG frequency range:

Approx. 300 kHz max.

· Pulse monitor output:

RS-422

· Power supply output for PG:

+5 V or +12 V, Max. current: 200 mA

PG-X2

(Code No. 73600-A015X)

Used for flux vector control. The PG mounted on the motor performs speed feedback to correct speed fluctuations due to slipping. (This card also performs V/f control with a Pulse Generator (PG).)

· PG-compatible RS-422 output

· Phase A, B and Z pulse (differential pulse) inputs

· PG frequency range:

Approx. 300 kHz max.

· Pulse monitor output:

RS-422

· Power supply output for PG:

+5 V or +12 V, Max. current 200 mA

Note 1: When an SI-P1 Card is used as a Profibus-DP slave, a GSD file is required separately. The SI-P1 Card is available when registered in Profibus-DP master using a GSD file. To obtain a GSD file, contact your YASKAWA representative.

2: PG Speed Controller Card is required for PG control.

*1: DeviceNet is a trademark of Open DeviceNet Vendors Association (ODVA).

 if you are looking for Yaskawa option card, please contact us.   we will do our best to help you find the Yaskawa option card that you are looking for at the most competitive prices possible.

most of our standard items are available ex-stock
for any other related information feel free to contact us. 
www.starautomations.com

http://www.automationcontrolandproject.com/
M:+91 9786622233
sales@starautomations.com